Pem Fuel Cell Test Laboratory Instrument 1kw Test Bench Hydrogen Testing Station

• After-sales Service: Yes
• Warranty: Yes
• Max Diameter of Workpiece: Other
• Mass Scope of Workpiece: Other
• Type: Pem Fuel Cell Test
• Maxcapacity: Other
• Model NO.: B-FC-TESTER
• Accuracy Grade: 1
• Load Way: Electronic Load
• Loading Method: Other
• Display: Digital
• Control: Manual Control
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• Maximum Wattage: 0-1800W
• Electronic Load Type: Resistor Type
• Current Range: 0~150A
• Current Resolution: 1mA
• Transport Package: Carton Packing
• Specification: 1KW
• Trademark: Baoqing
• Origin: China

Product Description

1KW PEM Fuel Cell + Test Bench

This PEM Fuel Cell test bench includes the following functions to analyse the fuel cell performance.

1. Real-time software interface, which can display the voltage and current output status of the fuel cell stack in real time, and can store and analyse the data in real time.

2. Precise control and measurement of fuel flow parameters, used to analyse the influence of hydrogen and air parameters on fuel cell stack power generation and find the best fuel cell stack control parameters. 3. precise control and measurement of air flow/temperature/humidity/pressure parameters, used to analyse fuel cell stack power generation.

3. Precise control and measurement of air flow/temperature/humidity/pressure parameters, which is used to analyse the influence of air parameter changes during fuel cell stack power generation and find the best fuel cell stack control parameter.

4. Circulating water module, supplying appropriate deionised water to the fuel cell to study the performance changes of the fuel cell under different temperatures.

TR X1800 Fuel Cell Test Equipment Specifications
Battery-loaded Equipment
Maximum Wattage	0-1800W
Electronic Load Type	Resistor Type
Current Range	0~150A
Current Resolution	1mA
Current Accuracy	0.05%+0.1%F.S
Voltage Range	0~60V
Voltage Resolution	0.1mV
Voltage Accuracy	0.05%+0.1%F.S
Data Capture Speed	0.1s
Interface Format	LAN
Constant Potentiometer (Optional)
Current Range	0~100A
Parameter	500 mA, 5 A, 20 A, 50 A
Current Accuracy	±0.2%
Voltage Measurement Accuracy	≤ 0.1 % of range + 0.1 % of reading
Current Measurement Accuracy	≤ 0.1 % of range + 0.5 % of reading
Voltage Range	±5V
Test Frequency Range	1mHz-100kHz
The Following Conditions Required Before Installing The Equipment
Pure Water: Water Pressure	400 kPa.g,
Water Flow Rate	>20cc/mi>20cc/min
Pure Water Impedance Value	>=15M Ω
Nitrogen: Purity	>99.995%,>10.5NLPM@6~7kg/cm2
Air Compression	Purity level <=ISO8573-1Class1No water, no oil,>5NLPM@6~7kg/cm2
Client need to prepare all the gas, water and electricity pipelines and power supply lines of the plant before you can connect with the equipment preparation.